Motor Grader | Road Grader | Construction Equipment - MCE
with you hamesha - 1800 209 6006
with you hamesha - 1800 209 6006 

Products & Solutions

Mahindra RoadMaster G90

Paving the future.

Made in India for Indian roads, is the Mahindra RoadMaster G90 summed up in a few words. After intense research into the road construction scenario in India, we realized that while many large and expensive motor graders from international companies are available in India, none of them are made for India keeping in mind the Indian requirements where more than 94% of the projects are of small and medium roads and will be upgraded to SH & NH soon. This is where the RoadMaster G90 comes into picture for such intermediary applications. It is also relevant for the applications as railways, industrial plot leveling among others.

The RoadMaster G90 is created to offer an affordable, un-compromised and mechanized grading solution for small & medium roads in India. It is designed with extensive research and input from Indian road contractors.
The RoadMaster G90 is an ideal grading machine for spreading, grading of earthwork in different types of roadwork across the nation in addition to being used for railway and ground levelling operations across sectors.
The G90 is designed to provide optimal output at affordable cost with its simple yet rugged design. The RoadMaster G90 comes with GPRS based remote monitoring system DigiSense that keeps a track of your machine with the touch of a finger.

Backed by the robust network of dealers and service centres across India, the RoadMaster G90 is sure to pave you a smooth road to the future.


Mahindra has taken its learnings from tractor engines, to bring its fuel efficiency down to an incredible 8-9* litres per hour.


The 3000 mm Mouldboard comes with an option of having its size reduced by 400 mm. Depending on the requirement the blade size can be reduced by 200 mm on both sides. The cutting edge has a lasting life of about 600 hrs on standard operation cycle.

Optional Attachments

Added versatility
The RoadMaster G90 comes with the option of having additional fitments viz the Ripper and Dozer for added versatility. The Ripper is perfect for ripping hard compacted surfaces before grading while the Dozer helps with spreading.


Mahindra believes that the most important part of the machine, is the person operating it. That’s why we have worked hard to make his experience the most comfortable for his long hours of work. Ergonomic layout and seating – all controls are smooth and easy to reach, spacious canopy, lockable storage and mobile charging.

Active Hydraulics

Mahindra RoadMaster G90 comes with advanced active hydraulics center pin dampening for precise finish in lesser passes. It posses 50 degree blade rotation with hydraulic cylinder mechanism. It holds the load with pressure relief valves for lift and sensing cylinder.

Differential Lock

Our new product comes with differential lock system which controls various differential assembles to improve grip in slippery conditions. It includes a positional first switch to select any one or more of the differential assemblies for operation in their locked condition and the second switch controls the locking of the differential assemblies selected by the first switch.

    Model Mahindra DITEC 4915 IA BSIII CEV
    Form of Air Aspiration Turbo Charged
    No of Cylinders 4
    Bore 96mm
    Stroke 122 mm
    Displacement 3532cc
    High idle rpm 2400 +/- 50 rpm
    Low ideal rpm 850 +/- 50 rpm
    Cooling system water cooled
    Type of fuel Diesel
    Gross horse power 66.9 kW (91 HP) @ 2200 +/- 50rpm
    Peak gross torque 345 Nm 1400-1600 rpm
    Electrical system voltage 12 V
  • Operating Specification

    Gross vehicle weight 8350 +/- 167 kg
    FAW 2800 +/- 56 kg
    RAW 5500 +/- 110 kg
    Speed @ gear (kmph) Forward Reverse
    1st 4.5 to 6 5.5 to 7.5
    2nd 7.5 to 9.0 9.0 to 10.5
    3rd 16.5 to 18.5
    4th 33.0 to 36.5
    Turning radius outside tyre R1 10 m
    Steering angle inner wheel 45 degrees
    Steering angle outer wheel 32 degrees
  • Moldboard

    Base Length of MB 2000 +/- 15 mm
    Thickness of Moldboard 16 +/- 0.5 mm
    Blade Height H19 516 +/- 3 mm
  • Cutting Edge (Blade)

    Standard Length of Cutting Edge WB 2600 mm
    {3 piece cutting edge}
    {1100 + 1100 + 400}
    Standard length of cutting edge
    with side extension
    WB 3000 +/- 15 mm
    {4 piece cutting edge}
    {1100 + 1100 + 400+ 400}
    Width of Cutting Edge 152 +/- 2 mm
    Thickness of Cutting Edge 16 +/- 0.5 mm
  • End Bit

    Width C 200 +/- 1 mm
    Thickness 16 +/- 0.5 mm
    Blade Pull force (Kgs ) 27
    Blade Down force (Kgs) 27
  • Dimensions (IN MM)

    Distance between mid & rear axle L9 1850 mm
    Distance between front & middle axle A 4300 mm
    Wheel Base L3 5225 mm
    Distance- Front axle to Moldboard
    Blade base
    L12 1691 mm
    Transport length L1 8578 mm
    Ground Clearance below front axle beam H18 528 mm
    Minimum Ground Clearance H4 467 mm
    Max vehicle height H1 3290 mm
    Track width- Front W3F 1674 mm
    Track Width Rear W3R 1654 mm
    Width- outside front tires W1F 2021 mm
    Width- outside rear tires W1R 2001 mm
    Width Transport
    (Without blade extensions)
    WW7 2327 mm
    Width Transport
    (With blade extensions)
    WW7’ 2080 mm
  • Blade Range

    Circle rotation angle AB 50 +/-1.5 deg from transverse of vehicle
    Circle drive Hydraulic cylinders with no
    end mechanical stoppers
    Blade side shift (LH/ RH) 513 +/-2.6 mm
    Blade tilt angle/ Bank cut angle
    (LH/RH) at ground level measured
    on blade
    25.6’ / 20’] +/- 2
    Blade pitch angle at ground line A11 Forward     40’ +/- 2
    Backward     15’ +/- 2
    Blade lift at normal blade pitch angle 395 +/- 25*
    Max blade cut depth below ground at nominal blade angle 300 +/- 25*
    Attachment oscillation angle Upward     10 +/-2 deg
    Downward     15 +/-2 deg
  • Transmission

    Model Name Carraro 4WDTransmission
    Gear Ratios Forward / Reverse
    1st 5.603 / 4.643
    2nd 3.481 / 2.884
    3rd 1.585 / 1.313
    4th 0.793 / 0.657
    Torque converter ratio 2.64
  • Front Axle

    Type None Driven, Steerable Central Pivoted
    Loading Capacity(TON) 8
  • Middle Axle

    Type Driven, Non Steerable, Rigid
    Reduction ratio, Differential 2.75
    Reduction Wheel end 6.932
    Total Reduction Ratio 19.04
  • Rear Axle

    Type Driven, Non Steerable, Central Pivoted, +/-5 Oscillation angle
    Reduction ratio, Differential 2.75
    Reduction Wheel end 6.932
    Total Reduction Ratio 19.04
  • Tyres and Wheels

    Tyre Spec 13 x 24-12 PR
    SLR 600 +/- 10
    DLR 603 +/- 10
    Wheel Rim Size 9x24
  • Tyre Pressure

    Front / Middle / Rear 44 +/-2psi
  • Brakes

    Service Brake type Foot operated hydraulically actuated oil immersed disc in middle axle
    Parking brake type Hand operated, mechanically, actuated oil immersed disc in middle axle
  • Steering

    Type Power Steering
    steering Valve Load sensing with priority valve 200 cc
    Other feature Emergency steering in case of pump failure
  • Electrical

    System Voltage 12 V
    Battery Rating 12 V, 100 AH
    Alternator type 12 V, 90Amp
  • Hydraulics

    System Open Centre
    Pump Type Fixed Displacement Tandem Gear Pump
    26. cc + 26 cc
    Max Pump Flow rate 54 litres@ 2200 rpm
    Max Working pressure 200 +/- 15 bar
    Refill qty 50 litres
    System Capacity 60 litres
    Other Feature Load Holding with pressure refill valves for lift and sensing cylinder
  • Service Capacities

    Hydraulic tank 50 litres @ 2000 hrs
    Fuel tank 85 litres
    Engine coolant 17 litres @ 1000 hrs
    Engine oil 13.5 litres @ 500 hrs
    Transmission 16 litres @ 1000 hrs
    Middle axle or Rear axle
    14.5 Litres @1500 hrs for each axle
    Middle Axle or Rear Axle
    (Final Drive)
    1.5 litres (On each wheel end) @ 1500 hrs
  • Optional Fitments

    Ripper 5 tyne
    Dozer 1.98 meter Width

Technical specifications, features are subjected to change without prior notice. Image used are for representative purposes only.
Accessories shown may not be a part of the standard product. Actual colours may vary. E & O.E.
All dimensions are variable within +/- 5% Standard Exclusions Apply. For further details on the warranty, please contact your dealer.
According to approved independent agency, under manufacturer standard PER/VEH/21 certified at 1450 RPM Value measured under specific measuring condition.