with you hamesha - 1800-547-0086
with you hamesha - 1800-547-0086 

Products & Solutions

Mahindra Motor Grader - RoadMaster G75 Smart - Brochure

In a developing country like India, 75% of roads are either expansion projects or rural/semi urban plans where productivity is duly optimized. With a year-long, in-depth study of Indian roads and its infrastructure, 20 000+ days of product development, and 6000+ hours of extensive testing in various locations across the country, Mahindra RoadMaster G7095 is the most optimized machine to help build a developing India.


New and improved hydraulic pump for smooth performance. Higher maximum pressure around 20 MPa for more power on blade. Bigger size of 26+26 cm3 gear pump for increased per-hour productivity.


Higher Rotation angle of around 50° from the transverse of the vehicle provides faster grading in heavy material. Blades easily accommodate between tyres while the machine is travelling. This helps in a smooth machine movement.


Longer base length, increased support, less vibration, and blade length of 3000 mm for better quality work and finishing.


Mahindra believes that the most important part of the machine is the person operating it. That’s why we have worked hard to make the operator experience comfortable for long hours of work. Ergonomic layout and seating – so that all controls are smooth and easy to reach. Including spacious canopy, lockable storage and mobile charging.

    Model Model BS TREM IV CEV
    Form of Air Aspiration Turbo Charged
    No of Cylinders 4
    Bore 96mm
    Stroke 122 mm
    Displacement 3532 cc
    High idle rpm 2400 rpm
    Low ideal rpm 850 rpm
    Cooling system Water cooled
    Type of fuel Diesel
    Gross horse power 55 kW (74hp) @ 2200 rpm
    Peak gross torque 345 Nm@1200-1500 rpm
    Electrical system voltage 12 V
  • Operating Specification

    Gross vehicle weight 7160
    FAW 2490
    RAW 4670
    Speed @ gear (kmph) Forward Reverse
    1st 4.5 to 6.0 5.5 to 7
    2nd 7.5 to 9.0 9.0 to 10.5
    3rd 16.5 to 18.5
    4th 33.0 to 38
    Turning radius outside tyre R1 10 m
    Steering angle inner wheel 45°
    Steering angle outer wheel 32°
  • Moldboard

    Base Length of MB 3000 mm
    Thickness of Moldboard 16 mm
    Blade Height H19 516 mm
  • Cutting Edge (Blade)

    Standard Length of Cutting Edge WB 2600 mm
    {3 piece cutting edge}
    {1100 + 1100 + 400}
    Standard length of cutting edge
    with side extension
    WB* 3000 mm
    {4 piece cutting edge}
    {1100 + 1100 + 400+ 400}
    Width of Cutting Edge 152 mm
    Thickness of Cutting Edge 16 mm
  • Dimensions (IN MM)

    Wheel Base L3 5050 mm
    Distance- Front axle to Moldboard
    Blade base
    L12 1691 mm
    Transport length L1 6880 mm
    Minimum Ground Clearance H4 472 mm
    Max vehicle height H1 3300 mm
    Track width- Front W3F 1674 mm
    Track Width Rear W3R 1594 mm
    Width- outside front tires W1F 2021 mm
    Width- outside rear tires W1R 2062 mm
  • Blade Range

    Circle rotation angle AB 500 from transverse of vehicle
    Circle drive Hydraulic cylinders with no
    end mechanical stoppers
    Blade side shift (LH/ RH) W15 513 mm
    Blade tilt angle/ Bank cut angle
    (LH/RH) at ground level measured
    on blade
    A9 200 / 150]
    Blade tilt angle/ Bank cut angle
    (LH/RH) at ground level measured
    on drawbar
    A9’ [25.60 / 200]
    Blade pitch angle at ground line A11 Forward     400
    Backward     50
    Blade without extension outside
    front tyre with blade positioned
    parallel to wheel axis
    W9 289.5mm
    Blade outside
    front tyre with blade positioned
    parallel to wheel axis
    ‘W9 489.5mm
    Blade lift at normal blade pitch angle H20 395 mm
    Max blade cut depth below ground at nominal blade angle D 300 mm
    Attachment oscillation angle E Upward     10 0
    Downward     15 0
  • End Bit

    Width C 200 mm
    Thickness 16 mm
    Blade Pull force (Kgs ) 27 kN
    Blade Down force (Kgs) 27 kN
  • Front Axle

    Type Non Driven, Steerable, Central Pivoted
  • Rear Axle

    Type Driven, Non Steerable, Central Pivoted
  • Tyres and Wheels

    Front Tyre 13 x 24-12 PR
    Rear Tyre 17.5 x 25-16PR
  • Tyre Pressure

    Front / Rear 44+-2psi
  • Transmission

    Model Name RoadMaster G75 Smart
    Gear Ratios Forward / Reverse
    1st 5.603 / 4.643
    2nd 3.481 / 2.884
    3rd 1.585 / 1.313
    4th 0.793 / 0.657
  • Hydraulics

    System Open Centre
    Pump Type Fixed Displacement
    Tandem Gear Pump
    26+26 cm3 (cubic centimetre)
    Max Pump Flow rate 108 lpm @ 2200 r/min
    Max Working pressure 20 Mpa
    Refill qty 50 litres
    System Capacity 70 litres
    Other Feature Load Holding with pressure refill valves for lift and sensing cylinder
  • Service Capacities

    Hydraulic tank 50 litre
    Fuel tank 100 litre
    Engine coolant 17 litre
    Engine oil 13.5 litres @ 500 hrs
    Transmission 16 litre
    Middle axle or Rear axle
    14.5 litre for each axle
    Middle Axle or Rear Axle
    (Final Drive)
    1.5 litre (On each wheel end)
  • Brakes

    Service Brake type Foot operated hydraulically actuated oil immersed disc in middle axle
    Parking brake type Hand operated, mechanically,Parking Brake type actuated Caliper Brakes on middle axle
  • Steering

    Type Power Steering
    steering Valve Load sensing with priority valve 200 cm3 (cubic centimeter)
    Other feature Emergency steering in case of pump failure
  • Electrical

    System Voltage 12 V
    Battery Rating 12 V, 100 AH
    Alternator type 12 V, 90 amphere

Technical specifications, features are subjected to change without prior notice. Image used are for representative purposes only.
Accessories shown may not be a part of the standard product. Actual colours may vary. E & O.E.
All dimensions are variable within +/- 5% Standard Exclusions Apply. For further details on the warranty, please contact your dealer.
According to approved independent agency, under manufacturer standard PER/VEH/21 certified at 1450 RPM Value measured under specific measuring condition.